FREN
Discuss your project

Expertise · Operational excellence

Operational excellence: improving OEE and site performance with your teams

Operational excellence consulting for manufacturers: understanding how a site really performs, quantifying the losses, then deploying the changes with the teams. Whoever runs the diagnosis is the one who runs the deployment: no handover, no junior team between the shop floor and you.

Understanding how a site really performs, then changing it with the teams

DOPEX is an independent consultancy. In operational excellence, the consultant's work starts on the shop floor: what the lines actually produce, where time is lost, why the same losses keep coming back. The service is aimed at manufacturers: SMEs, mid-caps and industrial groups.

See the references or discuss your site's performance.

Signs that a site needs an assessment

Typical situations include:

  • OEE is not measured, or each department disputes the figure the others produce;
  • everyone on the shop floor knows the losses, but nobody has put a number on them;
  • action plans pile up and run out of steam after a few weeks;
  • there is no performance review routine: problems surface as emergencies, not through the indicators;
  • the reports tell one story, the shop floor another.

Services

Six operational excellence services

They are selected according to what the assessment reveals.

01

Performance assessment

Measure what the site actually produces, line by line, against what it could produce, combining data, shop floor observation and conversations with the teams.

02

Flow and process analysis

Follow the product and the information from start to finish — waiting time, bottlenecks, interfaces between departments — to locate what really limits output.

03

Losses and potential quantified

Assign every loss to a category — stops, changeovers, speed, quality — and convert it into hours, volumes and euros.

04

Structured problem solving

Work recurring problems through to their root cause, as a group, with the people who know the workstation: facts, analysis, actions, effectiveness check.

05

Management routines and performance reviews

Daily line meeting, weekly review, escalation rules: short rituals built around a few indicators. Everyone knows what they look at and what they decide.

06

Field coaching, making it stick

Coach managers and team leaders on the shop floor while they take ownership of the new practices, until those practices hold without outside support.

Improving OEE: where to start on the shop floor

Data tells part of the story, the shop floor tells the rest. An assessment is not done from a spreadsheet. Improving OEE (TRS in French) usually follows five steps:

  • Make the measurement reliable: time definitions, how stops are recorded, reference rate. Without that, the figure gets argued over instead of worked on.
  • Break OEE down into availability × performance × quality, by line and by shift.
  • Rank the losses by their real weight: breakdowns, changeovers, minor stops, reduced speed, scrap.
  • Tackle the causes with the teams, at the machine, then test the solutions.
  • Put routines in place to track the indicator and the actions.

Lean tools are chosen to fit the problem, never applied for their own sake.

Performance management

Dashboards that serve the daily routines


A dashboard is only useful if it supports a decision. OEE is tracked where action is taken: by line, by shift, by day. Root cause analysis breaks down the gap between potential and actual output — stops, material, changeovers — until the causes that weigh most stand out. Machine reliability is tracked the same way: mean time between failures (MTBF), mean time to repair (MTTR) and the most frequent failures.

The daily meeting deals with those causes; the weekly review checks whether the actions are moving the indicator. Whether it is a whiteboard on the shop floor or a digital tool, the medium matters less than the regularity. AI can be applied to targeted use cases. It is never the starting point of a transformation.

Digital tools when they genuinely help the transformation

OEE tracking and root cause analysis

Food industry — anonymised illustration

POTENTIAL STOPS MATERIAL C/O ACTUAL

Machine reliability — MTBF & MTTR

Food industry — anonymised illustration

42.7 h MTBF — TARGET 48 h 3.6 h MTTR — TARGET < 4 h 12 34

Illustrations rebuilt from dashboards actually delivered on assignment. They contain no client data and no site, product or supplier names.

Turning OEE gains into P&L figures

Every workstream is tied to an indicator measured before, during and after: OEE, TEEP, OTIF, lead time, inventory, scrap, cost and customer service — and how they translate into the P&L.

An OEE gain frees up hours, which become extra output or overtime avoided: putting a figure on that is what links it to the P&L.

The aim is twofold: improve operational and economic results, and give managers the routines and skills to continue the transformation without us.

Method

From field assessment to embedding new practices


After the two scoping phases (sponsors, then local management), four phases carry the work on site. A kick-off opens each phase, from analysis to embedding. The goal: managers given ownership, problems solved collectively, skills handed over.

The full six-phase method
  • 03 · Analysis

    Field assessment — 1 to 4 weeks

    Data, process observation and conversations with the teams. Potential quantified.

  • 04 · Design

    Co-creation & training — 1 to 3 months

    Build the target state with the teams and train them as it is built.

  • 05 · Roll-out

    Implementation — 1 to 6 months

    Test, adjust, deploy. Presence maintained throughout execution.

  • 06 · Embedding

    Coaching & embedding — 2 weeks to 2 months

    Turn new practices into habits the teams hold without us.

Evidence

Operational excellence and OEE references

DOPEX Conseil assignment

Since the firm was founded.

DOPEX Conseil assignment · Waste management & recovery · France

An operational excellence programme built with the site.

Assessment then deployment of an operational excellence programme, aimed at improving site performance and its effect on the P&L. Four days a week on site: gains potential identified, target state designed with the teams, then rolled out. The programme pursues two inseparable outcomes: better operational and economic results, and managers equipped with the routines, methods and skills to carry the transformation on without us.

The waste management & recovery assignment
  1. Data and fieldwork
  2. Losses identified
  3. Potential quantified
  4. Solutions built with the teams
  5. Roll-out
  6. Operational impact
  7. P&L impact

Founder's experience

Before DOPEX Conseil was founded.

Assignments delivered in consulting and in industry, across five countries. They are not presented as the firm's own track record, but as the experience it draws on.

+18
OEE points

Founder's experience · Food industry · Nigeria

Operational excellence tools and routines deployed with the shop floor teams: method, fieldwork and team ownership, through to a measured result on line performance.

The Nigeria case

Engagement

Which sites, which regions


Based in the Lyon metropolitan area, France, DOPEX Conseil works in France, elsewhere in Europe and in Africa, in French and English.

Engagement formats
Work in Europe and Africa
  • SMEs & single sites

    Close, hands-on presence

    Often several days a week on the floor, with deliverables you can use straight away rather than a report.

  • Mid-caps & groups

    Project-grade capability

    Multi-site governance and the rigour a steering committee expects, without the overhead of a firm.

Frequently asked questions

Operational excellence FAQ

Do you need OEE tracking software to get started?

No. The starting point is a reliable, shared measurement: clear time definitions and stops recorded as close to the line as possible. Digital tools come next, when they save analysis time, remove non-value-added tasks or make performance management more reliable.

OEE, TRS, TRG: what do these terms mean?

OEE (overall equipment effectiveness), called TRS in French, compares the time spent making good parts at the nominal rate with the time the equipment was meant to be producing. It combines availability, performance and quality. Some French sites also track TRG, which sets the same productive time against the site's full opening hours and therefore also reveals planned downtime. Definitions vary from one company to another: what matters is pinning them down.

How are the gains sustained once the engagement ends?

Through the embedding phase, two weeks to two months: turning new practices into habits the teams hold without us. The performance review routines set up during roll-out are designed to be run by the site, and the skills are handed over to the managers: it is these routines, run by them, that keep the indicator under regular review.

Get in touch

Let's talk about your site's OEE and losses.

One conversation is enough to frame the need, the scope and the right format.

Contact details
Send an email Call